Boekel Scientific Small Laboratory Oven, 107800, 0.6 cu ft (115V/230V)
The Boekel Scientific Small Laboratory Oven is perfect for annealing, polymerizing plastics and product age acceleration. Supplied with 2 adjustable shelves and a thermometer.
Small Lab Oven Features
- Double wall construction, glass wool insulation
- Natural air convection
- Bi-metallic thermostats
- Aluminum interior
- Supplied with two adjustable tip-proof zinc plated steel shelves, thermometer (spirit filled)
- Equipped with advanced safety overtemp
- 2 year warranty
Boekel’s Convection Small Lab Ovens are designed to provide reliable performance to users in research and industrial laboratories, clinics and schools. Each oven comes with a thermometer and ferrule insert for tracking oven temperature and two movable shelves for holding samples. Additional shelves may be ordered.
Features
- Double wall construction, glass wool insulation
- Natural air convection
- Bi-metallic thermostats
- Aluminum interior
- Supplied with two adjustable tip-proof zinc plated steel shelves, thermometer (spirit filled)
- Equipped with advanced safety overtemp
- 2 year warranty
WARNING: DO NOT PLACE COMBUSTIBLE OR FLAMMABLE MATERIALS/SOLVENTS INSIDE OR NEAR THIS OVEN. NOT FOR USE IN WARMING PARAFFIN WAX OR ANY OTHER COMBUSTIBLE OR FLAMMABLE MATERIALS AND OR SOLVENTS.
Applications
- Drying glassware and samples
- Annealing
- Dry heat sterilization
- Evaporation
- Product age acceleration
- Polymerizing plastics
Boekel’s Convection Ovens come in three chamber volume sizes; including 0.6 cu. ft. (.017 cu. m.), 1.6 cu. ft. (.045 cu. m.) and 2.7 cu. ft. (0.76 cu. m.). All Boekel Oven models are designed to operate at a minimum temperature of 100°C and a maximum temperature of 215°C. The oven is equipped with an over-temp safety cutoff. If the chamber temperature exceeds approximately 290°C the safety cutoff will activate, shutting off the heater.
OPERATING INSTRUCTIONS
- Turn the Power switch to the “ON” position.
- Rotate the “Temperature Adjust” knob clockwise to increase the chamber temperature. Counterclockwise rotation will reduce chamber temperature.
- The red “Heat” Pilot Light will illuminate when the Oven heater is turned on. The light will alternate on and off when the oven reaches its set temperature.
- Allow 45 minutes for chamber temperature equilibration when first starting the Oven. Always monitor the temperature by using the thermometer provided. Allow at least 15 minutes for re-equilibration when adjusting chamber temperature.
